Document Library
Datasheets, manuals, drawings, brochures and case studies for every Infinitum product, with the full technical library hosted on our support site.
in Aircore EC+ Motor
This section includes safety guidelines you must adhere to when installing, operating, and servicing the Aircore EC+ motor. Ignoring safety precautions risks bodily harm, loss of life, or damage to the Aircore EC+ motor and its associated equipment. Read all…
Starting in November 2026, Aircore EC+ (non-AFE) motors ship with an 18-pin CIM-CIO board, as described in Product Notice PN 26-11. This document describes how to install the optional CIM Hardware Kit (part number: CIM-Hardware-Kit), which adapts the existing wiring…
A. Low-voltage, 3-phase, integral horsepower electronically commutated motor systems with integrated variable frequency drives
All registers are Holding Registers. These registers are the most universal 16-bit register, may be read or written, and may be used for a variety of things including inputs, outputs, configuration data, or any requirement for "holding" data. Some are…
The I-con Save State file captures information from your Infinitum motor and variable-frequency drive (VFD). Infinitum Support uses this file to help troubleshoot an issue remotely.
Download the zip file.
Download Aircore EC+ 13 drawing and step files.
Our smart motor system allows you to create customized sequences for application-specific functionality. The programmable software provides direct control over operational parameters providing maximum performance and real-time data monitoring.
Please provide the following information for each user to your Infinitum Account Manager:
Download Aircore EC+ 20 Drawing and STEP Files.
Answer: Ben Schuler, Infinitum’s CEO & Founder, is the original inventor of this technology. Ben’s previous company was focused on capturing waste energy from HVAC systems. While working to reduce the size and cost of the generator in that system,…
This guide contains general procedures for Infinitum Aircore EC+ motors and is not intended to provide a full list of installation details, operation and maintenance. These additional details can be found in the Infinitum Aircore EC+ IOM Manual. Only qualified…
This guide assumes that the motor has already been connected to power, and the Icon software has been set up and used successfully to connect to the motor. Visit the software landing page, quick-start guide, or installation and operation manual…
Aircore EC+ Service Parts. Motor touch-up paint pen. (RAL 3031 – Orient Red). LVP Powder and Paints. Gloss level: Matte 20-30%. Motor touch-up spray paint (Orient Red). LVP Powder and Paints. Gloss level: Matte 20-30%. 1/4” x 1/4”, 1-1/2” long.…
This document defines best practices for receiving, inspecting, unboxing, transporting, lifting, and assembling Infinitum motors. It provides critical “DO” and “DO NOT” guidance to protect the shaft, drive components, electronics, and lifting points, ensuring safe handling and equipment integrity from…
Download Aircore EC+ Frame 15 Drawing and Step Files.
Download Aircore EC+ Frame 18 Drawing and Step Files.
These instructions do not cover all variations in equipment nor provide information for every possible condition in installation,operation, or maintenance. For additional information, contact Infinitum Support.
This manual describes the information needed to operate Infinitum Aircore EC+ motors using the BACnet protocol. This manual should be used in conjunction with the Aircore EC+ Installation Operation and Maintenance (IOM) Manual.
Aircore EC+ Fan Technical Brochure
How to Register for the Fan Selection Tool
Aircore EC+ Fan Installation, Operation, and Maintenance Manual
Fan Selection Tool (FST) External Integration with Third-Party Applications
Division 23 EC Fans and Fan Arrays
Video: Fan Selection Tool Training 101
Data Center Applications Brochure
Can’t find what you’re looking for? Visit our Support Site.